Developed for use in high profile areas where the ultimate wet look gloss and durability are desired.
How To Use
Preparation: Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish.
Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more.
Maintenance: Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and recoat worn traffic areas as required. Spray buff as needed. Burnishing daily is highly recommended but not imperative.
Coverage: Coverage per 5 L is 170 m² (1830 ft²) to 280 m² (3014 ft²) depending upon porosity of the floor.
Where To Use
Suitable for all resilient and non-resilient floors except for unsealed wood and cork.